HPE ProLiant DL380 Gen9 Server

Server

HPE ProLiant DL380 Gen9 Server

  • BIOS:
    • initial: 3.30_09-21-2023_P89
    • updated: 3.40_08-29-2024_P89
  • CPU Support
    • From: E5-2603v3 – 1.6GHz – 6C – L3 15MB – 85W – QPI 6.4GT/s – DDR4 Hz 1600
    • Installed: E5-2698v3 – 2.3GHz – 16C – L3 40MB – 135W – QPI 9.6GT/s – DDR4 Hz 2133
    • To: E5-2699Av4 – 2.4GHz – 22C – L3 55MB – 145W – QPI 9.6GT/s – DDR4 Hz 2400
  • Chipset
    • Intel® C610 Series Chipset
    • Intel® E5-2600v3 Processor Family
    • Intel® E5-2600v4 Processor Family
  • On System Management Chipset
    • HPE iLO (Firmware HPE iLO4 2.0) 4GB NAND
  • Memory
    • Installed 24x32GB = 768GB (24 x 32GB RDIMM @2400MHz) Samsung
    • DDR4 Registered (RDIMM)
    • Load Reduced (LRDIMM)
    • Persistent Memory (NVDIMM)
    • DIMM Slots Available: 24 (12 DIMM slots per processor, 4 channels per processor, 3 DIMMs per channel)
    • Maximum Capacity (LRDIMM) 3TB (24 x 128GB LRDIMM @2400MHz)
    • Maximum Capacity (RDIMM) 768GB (24 x 32GB RDIMM @2400MHz)
    • Maximum Capacity (NVDIMM) 128GB (16 x 8GB NVDIMM)
    • Note mixing of 2133 and 2400MHz memory is not supported
    • Note mixing of RDIMM and LRDIMM memory is not supported
  • Memory Protection
    • Advanced ECC
    • Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip.
  • Online Spare
    • Memory online spare mode detects a rank that is degrading and switches operation to the spare rank.
  • Storage Controller
  • Entry Models:
    • HPE Dynamic Smart Array B140i Controller
  • Base Models
    • HPE Dynamic Smart Array B140i Controller
    • HPE Flexible Smart Array P440ar/2G FIO Controller
    • HPE Flexible Smart Array P840/4G FIO Controller
    • HPE Smart Array P840ar/2G Controller
  • Performance Models
    • HPE Dynamic Smart Array B140i Controller –
    • Installed: HPE Flexible Smart Array P440ar/2GB
    • HPE Smart Array P440ar Controller-c04346299
      • Storage interface (SAS/SATA)
      • 12Gb/s SAS (1200 MB/s theoretical bandwidth per physical lane)
      • 6Gb/s SATA (600 MB/s theoretical bandwidth per physical lane)
      • PCI Express Gen3 x8 link width
      • 2 GiBytes 72-bit wide DDR3-1866 Flash Back Write Cache provides up to 14.9GB/s maximum cache bandwidth
      • Internal: 8 SAS/SATA physical links across 2 x4 ports
      • 8 physical links across 2 x4 internal ports
      • 12Gb/s SAS, 6Gb/s SATA technology
      • Mix-and-match SAS and SATA drives to the same controller
      • Support for SAS tape drives, SAS tape autoloaders and SAS tape libraries
      • 2 GiBytes Flash-Backed Write Cache (FBWC)
      • PCI Express Gen3 x8 link
      • RAID 0, 1, 10, 5, 50, 6, 60, 10 ADM (Advanced Data Mirroring)
      • RAID or HBA mode
      • Legacy and UEFI boot operation
      • Up to 200 physical drives
      • Up to 64 logical drives
      • HPE SmartCache (optional license)
      • HPE Secure Encryption (optional license)
      • HPE SSD Smart Path
      • VMware Virtual SAN certified
      • Rapid Parity Initialization (RPI)
      • Rapid rebuild
      • Drive Erase
      • Performance Optimization-Degraded Reads and Read Coalescing
      • Power Efficiency
      • Seamless upgrades to and from other HPE Smart Array controllers
      • Flexible Smart Array controller (Daughter Card)
      • Dimension: 5.3 x 4.1 x 1.2 in (13.46 x 10.414 x 3.05 cm)
  • Installed Storage:
    • SSD: 2 x Intel
    • SAS: 3 x
  • Maximum Internal Storage
    • Hot Plug SFF SAS – 52.0TB – 24+2 x 2TB (with optional rear SFF drive cage)
    • Hot Plug SFF SATA – 52.0TB – 24+2 x 2TB (with optional SFF drive cage)
    • Hot Plug LFF SAS – 180.0TB – 12+3 x 12TB (with optional rear LFF drive cage)
    • Hot Plug LFF SATA – 180.0TB – 12+3 x 12TB (with optional rear LFF drive cage)
    • Hot Plug SFF SAS SSD – 397.8TB – 24+2 x 15.3TB (with optional rear SFF drive cage)
    • Hot Plug SFF SATA SSD – 199.68TB – 24+2 x 7.68TB (with optional rear SFF drive cage)
    • Hot Plug LFF SATA SSD – 57.6TB – 12+3 x 3.84TB (with optional rear LFF drive cage)
    • Hot Plug LFF SAS SSD – 28.8TB – 12+3 x 1.92TB (with optional rear LFF drive cage
    • Hot Plug SFF NVMe PCIe SSD – 46.08TB NVMe + 36TB SFF – 6×7.68TB NVMe plus 36TB with 18 SFF
  • Power Supply
    • HPE 500W Flex Slot Platinum Hot Plug Power Supply – Available in 94% efficiency.
    • HPE 800W Flex Slot Platinum Hot Plug Power Supply – Available in 94% and 96% efficiency
    • HPE 1400W Flex Slot Platinum Plus Hot Plug Power Supply – Available in 94% efficiency
  • OS:
    • Installed: Microsoft Windows Server 2019 Datacenter Edition – 
    • Canonical Ubuntu
    • Red Hat Enterprise Linux (RHEL)
    • SUSE Linux Enterprise Server (SLES)
    • Oracle Solaris
    • VMware
    • Citrix XenServer
    • ClearOS
  • Graphics
    • Integrated Matrox G200eH2 video standard with 16MB of Video RAM
    • 1280 x 1024 (32 bpp)
    • 1920 x 1200 (16 bpp)
  • HPE iLO 4 On System Management Memory
    • 16 MB Flash
    • 256 MB DDR3 with ECC (112 MB after ECC and video)
  • Form Factor
    • 2U Rack form factor
    • 8 SFF & 24SFF Drive Bay Version: 3.44 x 17.54 x 26.75 in (8.73 x 44.55 x 67.94 cm)
    • 4 LFF & 12LFF Drive Bay Version: 3.44 x 17.54 x 28.75 in (8.73 x 44.55 x 73.02 cm)
  • Server Serial Number: CZJ7450QBT
  • Benchmark
    • PassMark
    • Aida64